KG-600SR CNC Steady Rest Internal Compound Grinding Machine
CNC Steady Rest Internal Compound Grinding Machine
- Dual grinding spindle+steady rest
- Max grinding length up to 400mm
- Full splash guard
- Fanuc controller
- X, Y, Z axis stroke 800/450/450mm
The KG-600SR machine model features dual grinding wheel spindles with a center frame assembly and is capable of grinding workpieces with a depth of up to 400mm. It is equipped with a tailstock manual slide with air cushion design, allowing for the adjustment of the slide position as needed based on the workpiece length. Furthermore, it offers independent angle adjustment for the Y-axis to accommodate varying taper angles during the grinding process.
Accessories
X axis
- Rigid roller type linear way, four linear ways with 12 blocks to make sure axial rigidity and stability.
- With high rigidity A2-6 taper spindle. This spindle provides excellent radial rigidity, stable thermal, minimum heat deformation, and high dynamic accuracy to guarantee absolutely grinding quality.
- Air floating sliding design, easy to move workhead upon length of workpeices.
- Steady rest, suitable for long workpeice and provides stability during grinding.
Y&Z axis
- Belt type grinding spindle with diameter Ø90mm.
- Available to change into different speed, which greatly increase grinding efficiency upon various workepices.
- With air floating sliding way design, easy to adjust position upon needs.
Y axis
- Thinking from client, technology innovation from past.
- In past, standard taper grinding is with 2 axis simultaneous moving, it will cause friction on ball screw after long term usage and losing its accuracy.
- To give an ideal solution for client, we innovate an independent angle adjustment system for Y axis to guarantee stability and accuracy of taper grinding.
- Dual grinding spindle
- Steady Rest
- A2-6 Sleeve type rigid grinding spindle
Specifications
| Type | KG-600SR | |
|---|---|---|
| Working Capacity | Grinding dia, range | Ø 4 ~ Ø 320 mm |
| Max, grinding depth | 400 mm | |
| Controller System | Controller | FANUC |
| Workhead | Spindle speed | 0 ~ 1000 rpm |
| X-axis feedrate / Max stroke | 8 M/min / 800 mm | |
| X-axis minimum display unit | 0.0001 mm | |
| Swiveling angle | 0˚~+15˚ | |
| Worktable | Y-axis & Z-axis feed rate | 10/10 M/min |
| Y-axis & Z-axis max. stroke | 450+200/ 450+200 mm | |
| Y-axis & Z-axis minimum display unit | 0.0001 / 0.0001 mm | |
| Y-axis swiveling angle | 0˚~+10˚ | |
| Distance from spindle center to the ground | 1100 mm | |
| Swing of working Table | Ø 380 mm | |
| Hydraulic System | Oil Tank Capacity | 30 L |
| Cooling System | Coolant Tank Capacity | 380 L |
| Motor | Hydraulic motor | 0.75 Kw (1HP) |
| Coolant pump motor | Machine : 0.37 Kw (1/2HP) Base : 0.37 Kw (1/2HP) |
|
| X-axis & Y-axis & Z-axis servomotor | X : 2.5 Kw / Y : 2.5 Kw / Z : 2.5 Kw | |
| Grinding wheel motor (kw) | Y: 4.0， (5HP) Z: 4.0， (5HP) |
|
| Workhead motor | 1.8Kw(Brushless Servo) | |
| Others | Automatic lubricator | 4 L |
| Machine dimension (LxWxH)-including accessories | 3500 x 3150 x1960 mm | |
| Machine Weight | 8300 kg | |
| Standard accessories | CNC Controller | |
| Inverter for X-axis workhead motor | ||
| Inverter for Y-axis grinding spindle motor | ||
| Inverter for Z-axis grinding spindle motor | ||
| Y-axis grinding spindle | ||
| Z-axis grinding spindle | ||
| Hydraulic chuck | ||
| Hydraulic cylinder | ||
| Tricolor alarm lamp | ||
| Working lamp | ||
| Tool box | ||
| Automatic lubricator | ||
| Coolant tank and pump | ||
| Paper filter | ||
| Magnetic separator | ||
| Hydraulic tank with pump | ||
| Internal heat radiation system inside cabinet | ||
| Diamond Dresser | ||
| Leveling bolts and pads | ||
| Mechanical, electrical operation manuals | ||
| Fully-enclosed cover | ||